63A 100A 4p Double Power Source Automatic Transfer Isolating Switch

Basic Info

Model NO.	EDS1
Number of Poles	Three Pole
Grounding	Single Ground
Series	Two
Run	Turn the Horizontal
Switching Mode	Single Throw-in
Common Model	YR
Structure of Operating	Manual
Certification	ISO, GS, RoHS, CE, IS9001, ISO9001, ISO9002, ISO2000
Brand	Onccy
Transport Package	Box
Specification	plastic
Trademark	Onccy
Origin	China

Product Description

63A 100A 4p Double Power Source Automatic Transfer Isolating Switch

Product Profile

EDS1 Series isolator Parallel wiring, larger aperture, much easier wiring. Suitable for distribution box module with lock installation. Arc extinction time less than 3ms.Modular design. 2 poles & 4poles optional. Comply with IEC60947-3(ed.3.2):2015, DC-PV1standard.

EDS1 series isolation switch is suitable for a power system with rated voltage DC 1200V or below and rated current 32A or below. The product can be used for infrequent switching-on and switching-off and can disconnect 1 - 2 MPPT lines at the same time. It is especially suitable for isolating lines in HVDC transmission and distribution systems, such as cutting off the high voltage DC current between solar panels and inverters

Product Benefits

• Installed at any angle can achieve IP67 waterproof level
• UV resistance and V0 flame retardant material
• Contact Silver Plating, silver layer thickness to the industry's highest standards
• Arcing Time in 3ms
• Breather valve attached on the bottom of the isolator
• No Polarity
• Lockable at OFF position
• AS 60947.3:2018 and IEC 60947.1:2015 standard
• 5 years warranty, product insurance, and recall insurance available

Technical Data

Main Parameters			EDS1/N EDS1/S
Rated Insulation Voltage	Ui	V	1500
Rated thermal current	Ith	A	32
Rated impulse withstand voltage	Uimp	V	8000
Rated short-circuit making capacity	Icw	A	1 kA,1 S
Maximum cable section(incl.jumper)
Solid		mm2	4-16
Flexible		mm2	4-10
Flexible(+multicore cable end)		mm2	4-10
Torque
Tightening torque terminal screws M4.		Nm	1.2-1.8
Tightening torque shell mounting screws ST4.2(304 stainless steel)		Nm	1.5-2.0
Tightening torque knob screws M3		Nm	0.5-0.7
Switching on or off Torque		Nm	0.9-1.3
The wiring Torque on Base		Nm	1.1-1.4
General parameters
Knob Positions			12 o'clock,OFF 3 o'clock,ON 9 o'clock,OFF 12 o'clock,ON
Electrical Life	Actual		3000 Cycles
	Standard		300 Cycles
Mechanical Life	Actual		10000 Cycles
	Standard		10000 Cycles
Number of DC poles			2 or 4
Operation temperature		°C	-40 to +85
Storage termperature		°C	-40 to +85
Pollution degree			3
Overvoltage category			III
IP rating of shafte and mounting nul			IP66

Data according to AS60947-3

Main Contacts	Voltage	EDS1/N32
Rated thermal current Ithe		32 A
Rated insulation voltage Ui		1500 V
Distance of contacts(per pole)		8 mm
Rated operational current Ie(DC-PV2)
4 layers, only 2layers in series, with two load 1 2	300V	32 A
	600V	32 A
	800V	16 A
	1000V	9 A
4 layers, 4 layers in series, with one load 1 2 3 4	300V	32 A
	600V	32 A
	800V	32 A
	1000V	32 A

FAQ
Q: Are you trading company or manufacturer ?
A: We are manufacturer. We have 30,000 square meters of self-owned plant
Q: Do you have any certificates?
A: Yes,we have UL, TUV, CB, SAA, CCC, CE and other certifications
Q: How do we make a quick response to customer , 5 inquiry ?
A: Our professional team will reply you online or by email,Skype, whatsApp and so on
Q: Do you have any exporting experience?Which countries did you export to before?
A: We have lots of exporting experience and customers in many countries,such as America, Japan,Australia,UAE,Canada,Vietnam,Turkey,Thailand,Russia,UK,etc
Q:Can you supply samples for checking ?
A: Yes, we can supply samples, pls contact for detailed required
Q:How long is your delivery time?
A: Generally it is within 3days for small qty. Or it is around 15-20 days to a general order
Q: What is the standard of package of your goods?
A: Export standard package or special package according to customer requirement
Q:How about inspection?
A: We have the whole inspection system from raw material to end products include transient test, delay test,mechanical life test and so on
Q:What is the service offered by company?
A: We have the professional engineer team which can design and develop the mould to arrive different customer requirements. We also have the professional sales team to offer good service from pre-sale to after-sale.